- Home
- ยป
- Our Product Range
- »
- Lcd & Displays
Lcd & Displays

16X2 Blue LCD
Module Size | 80.036.0 |
VA Size | 64.016.0 |
Character Size | 2.965.56 |
Dot Size | 0.560.66 |
Dot Pitch | 0.600.70 |
Duty Bias | 1/16 - 1/5 |
Backlight | No LED |
LCD Type | FSTN, STN |
Color Available | Blue, White. |
Features:
- Low power consumption
- The display on/off
- Clear Screen
240X128 Blue LCD Module
Color | Blue, White |
Display Construction | 240X128 DOTS |
Number of Data Line | 8-bit parallel |
Connector | Pin |
Module Size | 144 mm x 104.0 mm |
Viewing Area | 114 mm x 61.0 mm |
Diameter of Mounting Hole | 3.0 mm |
Weight About | 50 g |
Display Mode | STN OR FSTN( Y/G) |
Display Type Positive | Transflective |
Backlight | Blue 5.0V |
Viewing Direction | 6 o'clock |
Operating Temperature | Indoor |
Driving Voltage | Single power |
Driving Method | 1/128 duty, 1/12 bias |
Type | COB (Chip On Board) |
The JHD240128/JHD240128D is based on T6963CFG controller. A fairly popular controller used on majority of these parallel character displays. It is easy to use and compatible with majority of microcontrollers out there. Remember, although they all use the same internal controller, the pinout varies for for displays from different brands. You can do a lot of graphics stuff with this display. You can create frames and even make small animations. Note that the displays expects individual pixels to be turned ON/OFF. It does not support ASCII Inputs like the character display. It may sound like a disadvantage but it is not. It can be used to create beautiful fonts of any sizes you need. You need to store these fonts in the microcontroller and send then to the display. We have tutorials that can help you do this fairly easily.
240X128 Green LCD Module
Display Construction | 240X128 DOTS |
Number of Data Line | 8-bit parallel |
Connector | Pin |
Color | Green, Yellow |
Module Size | 144 mm x 104.0 mm |
Viewing Area | 114 mm x 61.0 mm |
Diameter of Mounting Hole | 3.0 mm |
Weight About | 50 g |
Display Mode | STN OR FSTN( Y/G) |
Display Type Positive | Transflective |
Backlight | Green 5.0 V |
Viewing Direction | 6 o'clock |
Operating Temperature | Indoor |
Driving Voltage | Single power |
Driving Method | 1/128 duty, 1/12 bias |
Type | COB (Chip On Board) |
The JHD240128/JHD240128D is based on T6963CFG controller. A fairly popular controller used on majority of these parallel character displays. It is easy to use and compatible with majority of microcontrollers out there. Remember, although they all use the same internal controller, the pinout varies for for displays from different brands. You can do a lot of graphics stuff with this display. You can create frames and even make small animations. Note that the displays expects individual pixels to be turned ON/OFF. It does not support ASCII Inputs like the character display. It may sound like a disadvantage but it is not. It can be used to create beautiful fonts of any sizes you need. You need to store these fonts in the microcontroller and send then to the display. We have tutorials that can help you do this fairly easily.
128X64 Blue LCD Module
Color | Green |
Power Supply | 5 V |
Display | LCD |
Type | LCD Display |
Features:
- Easy To Use
- Works with Most Microcontrollers
- Built-in Controller (KS0108B)
- 5V Power Supply
- 1/64 Duty Cycle
- Built-in Backlight
- Ideal for Moving Displays & Graphics
- Good Value for money
16X2 Green LCD Module
Color | Green |
Voltage | 5 V |
Display Type | LED |
Being one of the trusted firms in the industry, we are highly engaged in providing a unique range of 16X2 Green LCD Module.
This is a popular 16x2 LCD display. It is based on the hd44870 display controller hence it is easy to interface with most micro controllers. It works of 5v and has a green back light which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltage at the contrast control pin.
Features of 16x2 LCD Display
- 5 x 8 and 5 x 10 dot matrix possible.
- Low power operation support: 2.7 to 5.5V.
- Correspond to high speed MPU bus interface 2 MHz (when VCC = 5V)
- 4-bit or 8-bit MPU interface enabled.
- 80 x 8-bit display RAM (80 characters max.)
- 9,920-bit character generator ROM for a total of 240 character fonts
128X64 Green LCD Module
Voltage | 5 V |
Size | 93x70 mm |
Color | Blue |
Features:
- Liquid crystal display
- Built-in controller
- Built-in negative voltage