EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Product Range
- »
- Arduino Shields
Arduino Shields
We are a one of the leading Suppliers of Shields for Arduino. We are engaged in providing a vast variety Shields and provide in-depth assessment about the market trends, client needs and requirements. Our range of products offered under this catagory includes products like L293 Motor Driver Shield, ESP8266 Wifi Shield, Ethernet Shield, USB Host Shield, Xbee Shield, LCD Shield, Data Logging Shield, Prototype Shield, CNC Shield, Etc.
Ethernet Shield W5 100 For Arduino
Product Price: Rs 450 / PieceGet Best Price
Minimum Order Quantity: 01 Piece
Product Details:
| Weight | 26 g |
| Width | 69 mm |
| Height | 23 mm |
| Depth | 53 mm |
| Box Depth | 12 cm |
| Material | Plastic, FR4, Metal |
- With this Ethernet Shield, your Arduino board can be used to connect to internet.
- Can be used as server or client.
- Directly plug puzzle board, no soldering required.
- Controller: W5100.
- This is the latest version of the Ethernet Shield.
- This Arduino Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Online.
- It is directly supported by Arduino official Ethernet Library.
- It adds a micro-SD card slot, which can be used to store files for serving over the network.
- It is compatible with the Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560) and can be accessed using the SD library.
- The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP.
- It supports up to four simultaneous socket connections.
- Use the Ethernet library to write sketches which connect to the internet using the shield.
- Fits all version of Arduino Main board,2009,UNO, mega 1280, mega 2560.
- Size: 7cm x 5.4cm x 2.4cm - 2.76inch x 2.12inch x 0.94inch.
- MAC address: 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }
Get Best Quote
Request Callback
1602 LCD Board Keypad Shield
Product Price: Rs 235 / PieceGet Best Price
Minimum Order Quantity: 01 Piece
Product Details:
| Color | Blue |
| Weight | 40.0 grams |
| Material | Plastic |
| Width | 109.98 mm |
| Height | 29.97 mm |
| Depth | 130.05 mm |
We offer 1602 LCD Board Keypad Shield to our esteemed clients. The LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 5 keys – select, up, right, down and left.
Features:
- 4 Bit Arduino LCD Library
- Adjustable backlighting
- Interface code is freely available
Get Best Quote
Request Callback
WEMOS D1 R2 WIFI ESP8266 SHIELD FOR ARDUINO
Product Price: Rs 425 / PieceGet Best Price
Minimum Order Quantity: 01 Piece
Product Details:
| Operating Voltage | 3.3 V |
| Flash Memory | 4 MB |
| Analog Input Pins | 1 (3.2V max input) |
| Output | 5 V at 1 A Max |
| Board Dimensions | 68.6mm x 53.4mm (2.701" x 2.102") / Long x Wide |
Product Details:
Microcontroller | ESP8266EX |
Operating Voltage | 3.3V |
Digital INPUT OUTPUT Pins | 11 (all I/O pins have interrupt/pwm/I2C/one-wire capability, except for D0) |
Flash Memory | 4MB |
Analog Input Pins | 1 (3.2V max input) |
Output | 5V at 1A Max |
Board Dimensions | 68.6mm x 53.4mm (2.701" x 2.102") / Long x Wide |
Weight | 21.8g (0.769oz) |
The D1 R2 is a WiFi capable ESP8266EX based development board in the form of the common Arduino UNO board format. This board is compatible with the Arduino IDE and with NodeMCU. The D1 R2 also features an on-board switching power supply which allows you to power the board from a power supply up to 12V.
*Note: The D1 R2 is a 3.3V device. If you connect it to 5V digital sensors or devices you will need a logic level converter.
|
Specifications:
- Microcontroller: ESP8266EX
- Operating Voltage: 3.3V
- Digital I/O Pins: 11 (all I/O pins have interrupt/pwm/I2C/one-wire capability, except for D0)
- Analog Input Pins: 1 (3.2V max input)
- Flash Memory: 4MB
- On-Board Switching Power Supply
- Input Voltage Range: 9V to 12V
- Output: 5V at 1A Max
- Board Dimensions: 68.6mm x 53.4mm (2.701" x 2.102") / Long x Wide
- Weight: 21.8g (0.769oz)
Get Best Quote
Request Callback
USB Host Shield for ARDUINO
Product Price: Rs 650 / PieceGet Best Price
Minimum Order Quantity: 01 Piece
Product Details:
| Packing Type | Box |
| Width | 69.09 mm |
| Height | 27.94 mm |
| Depth | 102.11 mm |
| Weight | 36.29 g |
Description:
The USB Host Shield contains all of the digital logic and analog circuit necessary to implement a full-speed USB peripheral/host controller with Arduino. User can use the Arduino to connect and control any USB slave device easily.
Features
- USB 2.0 Full Speed compatible
- 3.3/5V operation level compatible
- All GPIOx pins break-out
- USB Host 5V/500mA supply for USB protocol
Specifications
Operating Voltage | 5V |
USB Controller | MAX3421E |
Max Current | 500mA when Arduino is powered by a suitable power supply connected to the Arduino power jack |
Max Current | 400mA when Arduino is powered by its USB port |
Get Best Quote
Request Callback
Prototype Shield With Breadboard for Arduino UNO
Product Price: Rs 160 / PieceGet Best Price
Minimum Order Quantity: 01 Piece
Product Details:
| Packing Type | Box |
| Weight | 30.0 grams |
| Type | Breadboard |
Description:
ProtoShield is used in conjunction with Arduino Duemilanove.
Used to build a circuit prototype, can be directly soldered components on the board.
Can also be connected through the mini breadboard circuit.
1 reset button, 1 general use button, and 2 LED circuits can be used directly.
5V, GND, and Raw pins are exposed as well.
The mini breadboard has 170 tie points.
SOIC place for IC.
The breadboard sticks on the prototype shield with its self-adhesive backing.
Specification:
- Color: Blue black white
- Prototype size: 6.8 * 5.4 * 2cm (2.67in * 2.12in * 0.78in)
- Mini breadboard size: 4.7 * 3.5 * 0.9cm (1.85in * 1.37in * 0.35in)
- Weight: 31g(1.09oz)
Get Best Quote
Request Callback
Prototype Shield V3 Mini Bread for Arduino Mega
Product Price: Rs 180 / PieceGet Best Price
Minimum Order Quantity: 01 Piece
Product Details:
| Weight | 49.9 g |
| Type | Bread Board |
| Power Supply | 5 V |
Product Details:
Color | Blue |
Dimension | 56mm x 105.5mm |
Compatibility | Arduino Mega ATmega1280 / MEGA2560 |
Support for breadboard | Support sticking the mini bread boards on this shield |
Indicators | 1. PWR 2. STAT |
Description
The board can not only receive MEGA seamless plug controller, directly soldered to the above components to complete a variety of prototype circuit, you can paste Mini bread board, through the 7-color jumper to complete a variety of circuit experiment , board integrated power indicator and status lights, and reset buttons, easy to learn MEGA preferred prototype controller expansion board.
Technical Specifications
- Arduino MEGA / MEGA2560 ProtoShield prototype expansion board with Immersion Gold PCB processing technology, motherboards, small gold square pad spacing, welding components easier.
- SOP28 SMD component package to be more handy Arduino electronics enthusiasts will not be directly insert bound components.
- The board can receive Arduino MEGA / MEGA2560 seamless plug controller, directly soldered to the above components to complete a variety of prototype circuit, you can paste Mini bread board, through the 7-color jumper to complete a variety of circuit experiment , board integrated power indicator and status lights, and reset buttons, easy to learn Arduino MEGA / MEGA2560 preferred prototype controller expansion board.
- Full Compatible with Arduino Mega ATmega1280 / MEGA2560.
- High sensitivity with integrated low-noise RF input amplifier.
Get Best Quote
Request Callback
L293D Motor Shield for Arduino
Product Price: Rs 200 / PieceGet Best Price
Minimum Order Quantity: 01 Piece
Description:-
This Arduino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motors or two 4-wire stepper and two 5V 'hobby' servo. It drive the DC motor and stepper with the L293D, and it drive the servo with Arduino's pin9 and pin10.
Features:
- 2 x L293D Motor Control Chips
- Total of 4 H-Bridges for controlling 4 DC motors or 2 Stepper motors
- 2 x Server ports for controlling RC Hobby Servos
- The logic control voltage Vss: 4.5~5.5V
- Motor Supply Voltage: 4.5 ~ 12V
- Reduced control pins needed through 8-stage serial shift registers
- Drive part of the operating current Io: 1.2A (0.6A per bridge)
- External power connection via a screw-terminal block
- Screw-Terminal blocks for connection to motors
Get Best Quote
Request Callback
2.4" LCD TFT Display
Product Price: Rs 415 / PieceGet Best Price
Minimum Order Quantity: 01 Piece
Features:
- Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control
- Colorful, 18-bit 262,000 different shades
- 4-wire resistive touchscreen
- 240 x 320 resolution
- Spfd5408 controller with built in video RAM buffer
- 8 bit digital interface, plus 4 control lines
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the micro SD
- 5V compatible, use with 3.3V or 5V logic
- Size: 71 x 52 x 7mm
Get Best Quote
Request Callback
Multi Function Shield
Product Price: Rs 225 / PieceGet Best Price
Minimum Order Quantity: 01 Piece
Product Details:
Dimensions | 69 x 54 x 11 (L / W / H) |
Weight | 27gm |
Display | 4 digit 7-segment LED display module driven by two serial 74HC595 |
wireless communication | Bluetooth, wireless interfaces, voice module , voice recognition module |
Servo interface | Easy to drive servos |
The APPC220 Bluetooth Voice Recognition Module has a wide range of features which makes it perfect for beginners who want to study. It can be useful for advanced users because it has built-in general purpose components:
Unit | PIN # |
4 red LEDs | 10, 11, 12, 13 |
3 buttons + reset button | A1, A2, A3 |
Potentiometer (10 kOhm) | A0 |
4-digit 7-sement LED tube driven by 74HC595 | Latch 4, Clock 7, Data 8 |
Buzzer (loud speaker/beeper) | 3 (digital On/Off) |
Socket for infrared receiver (remote control) | 2 |
Socket for temperature sensor LM35 or DS18B20 | A4 |
Header for APC220 shield | GND, +5v, 0, 1 (rx/tx) |
Free pins (pwm) | 5, 6, 9, A5 |
Get Best Quote
Request Callback
Data Logger Shield For Arduino
Product Price: Rs 310 / PieceGet Best Price
Minimum Order Quantity: 01 Piece
Product Details:
| Color | Blue |
| Brand | Engineers Bazaar |
Features:
SD card interface works with FAT16 or FAT32 formatted cards.
3.3V level shifter circuitry prevents damage to your SD card.
Real time clock (RTC) keeps the time going even when the Arduino is unplugged.
Included libraries and example code for both SD and RTC, means you can get going quickly.
Prototyping area for soldering connectors, circuitry or sensors.
Onboard 3.3V regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher.
ADK/Mega R2 or lower are not supported.
Specifications:
- Size: 68 x 53 x 23mm (approx)
- Regulator voltage: 3.3V
- Battery: CR1220 3V
Get Best Quote
Request Callback
Arduino Wifi Shield ESP13 Web Sever Serial Wi-Fi Expansion
Product Price: Rs 730 / PieceGet Best Price
Minimum Order Quantity: 01 Piece
Product Details:
A serial port baud rate support | 1200/2400/4800/9600/4800/9600/57600/74800/115200 BPS. |
A serial port data bits | 5/6/7/8 |
Working temperature | - 40 + 125 deg C |
Modules weight | about 20 g |
WiFi working current | continue to send: material 70 ma 200 ma (MAX), standby: less than 200 ua |
Features:
1. WiFi using industrial-grade ESP8266 chips, modules for ESP13 with metal shield, strong anti-interference ability;
2. standard pin compatible with the Ar-duin Uno, Me ga2560, such as main control board, a voltage conversion chip is used to connect with the Ar-duin Uno, 3.3V and 5V compatible;
3. a serial port using dual dial the code switch to control, makes the extension board can separate as Ar-duin Uno extended board is used, can also be used as ESP8266 extension plate;
4. Real serial WiFi, the Ar-duin program without any configuration;
5. WiFi based on the Web Server configuration parameters and serial port;
6. Can be used as an independent ESP8266 development board, download the official firmware the AT command, Node MCU open-source firmware, etc;
7. Can be used as an independent Ar-duin Uno expansion board, pins all leads.
Specifications:
1. Support wireless 802.11 b/g/n standard;
2. Support the STA/AP two working mode;
3. Built-in TCP/IP protocol stack, you can configure a socket;
4. Support the standard TCP/UDP Server and Client;
5. A serial port baud rate support: 1200/2400/4800/9600/4800/9600/57600/74800/115200 BPS.
6. A serial port data bits: 5/6/7/8;
7. Serial ports, parity: no;
8. Serial ports, stop bit: 1/2;
9. Standard Ar-duin UNO, Me ga pin spacing;
10. Which leads to the Ar-duin Pin 2/3/4/5/6/7/8/9/10/11/12/13;
11. Which leads to the ESP8266 GPIO 0/2/4/5 9/10/12/13/14/15/16 / ADC/EN/UART TX/UART RX.
12. RESET RESET;
13. KEY buttons reuse configuration function;
14. Two dial the code switch to realize the Ar-duin and ESP8266 serial port extension switch;
15. WiFi working current: continue to send: material 70 ma 200 ma (MAX), standby: < 200 ua;
16. Wireless transmission rate: 110-460800 BPS
17. Working temperature: - 40 + 125
18. Modules weight: about 20 g
Get Best Quote
Request Callback
Version 3.0 CNC Shield
Product Price: Rs 190 / PieceGet Best Price
Minimum Order Quantity: 01 Piece
Product Brochure
Description:
The CNC Shield makes it easy to get your CNC projects up and running in a few hours. It uses opensource firmware on Arduino to control 4 stepper motors using 4 A4988 Stepper drivers,, with this shield and the Arduino you can build all kinds of robotics or CNC projects including CNC routers,laser cutters and even pick&place machines.
Features
- GRBL 0.8c compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals.
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
- Spindle, Coolant enable and direction
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping)
- Compact design.
- Stepper Motors can be connected with 4 pin molex connectors.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board).
Get Best Quote
Request Callback