- Home
- ยป
- Our Product Range
- »
- 3D Printer Parts
3D Printer Parts
Ramps 1.4 3D Printer Control Board
Minimum Order Quantity: 01 Piece
Description:
The RAMPS (RepRap Arduino Mega Shield) is an all-in-one design to fit the necessary components for a 3D printer into one plug in shield for an Arduino MEGA. The plug in shield design includes plug in stepper drivers and extruder control electronics sockets for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. Ramps boards are the heart of most DIY 3D printers on the market and a nice clean compact way to integrate all the systems into a compact enclosure mountable format.
Features:
- Expandable to control other accessories.
- 3 Mosfets for heater / fan outputs and 3 thermistor circuits.
- Fused at 5A for additional safety and component protection
- Heated bed control with additional 11A fuse
- Fits 4 x A4988 stepper driver boards
- Shield has on pin header sockets so they can be replaced easily or removed for use in future designs.
- I2C and SPI pins left available for future expansion.
- All the Mosfets are hooked into PWM pins for versatility.
- Servo style connectors are used to connect to the end stops, motors, and LEDs. These connectors are rated for 3A, very compact, and globally available.
- SD Card add on available
- LEDs indicate when heater outputs on
- Option to connect 2 motors to Z for Prusa Mendel
20x04 LCD Smart Display Controller Module for RAMPS 1.4
Minimum Order Quantity: 01 Piece
Description:
The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using "smart adapter" included.
This panel connect your RAMPS 1.4, you do not need your computer, your SD card intelligent controller power supply. All further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller. 3D design print without a computer, just use the G code design stored on the SD card.
Features:
- RAMPS 1.4 LCD2004 intelligent controller
- LED backlight control circuit
PCB Heat Bed MK2B 12V/24V For 3D Printer
Minimum Order Quantity: 01 Piece
Product Brochure
Product Details:
Minimum Order Quantity | 1 Number |
Model Number | MK2B |
Printer Type | 3 D printer |
Part Type | Heated Bed PCB |
Size | 214mmx 214mm |
Color | Red |
Description:
RepRap MK2B Dual Power Supply is a Heated Bed designed for Reprap Prusa and Mendel 3D Printers . It can be used with other 3D Printers too . MK2B is the latest version of the heat bed and features LEDs and 12 / 24V Dual power supply options . This heatbed is etched directly on 35µm copper clad and features uniform even heating and a high heat output .
Details:
- Color: Red
- Etching: 35um copper
- Dimensions 214mmx 214mm
- Laminate FR4 1.6+-0.15mm
- 2 layer, 35μm copper
- Red Soldermask - both sides
- White Silkscreen - both sides
- Power Input: 12V or 24v
- Copper plated holes
100K OHM NTC Thermistors For Reprap 3D Printer
Minimum Order Quantity: 01 Piece
Product Details:
Operation temperature range | -50 to +260 degrees Celsius |
Thermal time constant | Less Than 5s (in Still Air) |
response time | Fastest |
Type | NTC |
Description:
NTC thermistor for temperature sensor is one where the thermistor chip is welded with leads by alloy soldering process, then partially treated by glass sealing.
The element has a bead form with good stability, small size and rapid response
Widely used in temperature sensors,electronic thermometers and eternity calendar, temperature compensation,various kinds of household appliances as well as Industrial, medical, environmental protection, weather and food processing equipment etc.
Features:
- Fastest response time and high accuracy
- Better Stability ,as chip is welded with leads by alloy soldering process
- High resistance and mechanical strength
- Small size, lightweight and cheap
- Mass production for high accurate element
- Operation temperature range: -50 to +260 degrees Celsius
- Thermal time constant: less than 5s (In still air)
- Usable in high-temperature and high-moisture environments
Cartridge Heater 6mm For 3D Printer
Minimum Order Quantity: 01 Piece
Increases the reliability of extruder with this heater cartridge and also it heats up faster. It fits nicely in one's extruders, hence is an easy replacement.
Features:
- Voltage: 12V and 24V (Available in both Voltage)
- Power: 40W
- Wire length: 1m
- Cartridge length: 2.3cm
- Cartridge diameter: 6mm
3D Printer Mechanical Limit Switch
Minimum Order Quantity: 01 Piece
Product Details:
Switch Type | Lever Limit Switch |
The mechanical endstop uses a lever switch to detect when it is activated . The switch is wired up so that when activated , it pulls the signal to LOW . There is also an LED on the board that will light up when the switch is activated . It uses a standard 4 pin .1" pitch header and accepts a standard , old-style CD-ROM audio connector cable.
Aluminum Flexible Coupling
Minimum Order Quantity: 01 Piece
Product Brochure
Product Details:
Made of | machined aluminum |
Measures | 1" x 0.7" diameter / 25mm x 18mm diameter |
Weight | 15 grams |
Applications | Shaft coupler Often used to connect servo motor, stepper motor, encoder, screw driving, machine plat |
Inner diameter | 5mm |
Description:
These couplers are made of machined aluminum and have a spiral cut that makes them slightly flexible so they can be fit to two shafts even if they are not perfectly co-linear and will help reduce binding effects.The way they're cut, they're a little springy in the X Y Z linear axis but not in the rotational axis. That means that you won't get increased backlash - so they're suitable for precision CNC work.
Specifications:
Measures 1" x 0.7" diameter / 25mm x 18mm diameter
15 grams
Note : Available as below
- 5 to 5 mm
- 5 to 8 mm
T Type Lead Screw Nut
Minimum Order Quantity: 01 Piece
Features:
- Material: Brass
- Lead Screw Diameter: 8mm
- Pitch: 2mm
- Lead: 8mm
- Suitable for 3D printer Z Axis.
Turbo Fan Blower
Minimum Order Quantity: 01 Piece
Product Details:
Power Source | Electric Blower |
Voltage | 12V DC |
Fan dimension | 40x40x20mm |
We are leading supplier of Turbo Fan Blower. 3D Printer Turbo Fan Blower 4020 DC 12V 40x40x20mm Cooling Fan 3D Printer Accessory
Features:
- Fan dimension: 40x40x20mm
- Voltage: 12V DC
Linear Bearing
Minimum Order Quantity: 01 Piece
Linear Motion Ball Bearing
- Material: Metal, Rubber
- Screw Hole Dia(Each) : 4mm
- Pitch : 26 x 30mm
Note : Models Available
- SCS8UU - Inner Diameter : 8mm
- SCS10UU - Inner Diameter : 10mm
- SCS12UU - Inner Diameter : 12mm
NEMA17 Stepper L Clamp For 3D
Minimum Order Quantity: 01 Piece
Comes with one Clamp and a bag of hardware for attachment:
- 4 x 8mm long M3 Button head
- 4 x 10mm long M3 Csk head
- 4 x M3 nut
3D Printer Pen
Minimum Order Quantity: 01 Piece
Product Brochure
Product Details
Minimum Order Quantity | 1 Number |
Material | ABS or PLA |
Power Adapter | 12V 3A |
LEDs | 2 Nos. ( Power LED & Working LED) |
Speed | Unique speed control switch |
Temperature Control | Adjustable LED screen to control the temperature |
Description
The3D Penis a tool for freehand drawing of 3D objects . It is compatible with ABS PLA Material . Ergonomic design for optimum handling Durability . Adjustable output speed . Filament colors can be changed easily by pressing a button . LED indicator to check the operating temperature .
Package Includes
1 x 3D Pen1 x 12V 3A Power Adapter1 x Free 1.75mm ABS / PLA Filaments ( Random Colors )1 x User Manual
12864 Graphic Smart Controller LCD Display for RAMPS 1.4
Minimum Order Quantity: 01 Piece
Product Brochure