Engineers Bazaar
Engineers Bazaar
Juna Palghar, Palghar, Maharashtra
SEND SMS
SEND EMAIL

Modules

Offering you a complete choice of products which include cc1101-868mhz rf module with spring antenna, finger print module gt-511c3, arduino compatible voice recognition module, 4 wire resistive touch screen mux, jpeg color camera serial uart interface module and micro module.

CC1101-868MHz RF Module With Spring Antenna

CC1101-868MHz RF Module With Spring Antenna
  • CC1101-868MHz RF Module With Spring Antenna
  • CC1101-868MHz RF Module With Spring Antenna
  • CC1101-868MHz RF Module With Spring Antenna
Get Best Quote
Approx. Price: Rs 472 / PieceGet Latest Price

Product Details:

Model NoCC1101-868MHz
Voltage1.8~3.6 V
TypeFull PAD Spring Antenna

Keeping in mind, ever-evolving requirements of our valuable clients, we are offering quality assured CC1101-868MHz RF Module With Spring Antenna. The CC1101-868MHz RF module is low cost and highly integrated UHF transceiver designed for very low power wireless applications. These certified modules, operating in the license-free 433 MHz ISM band, can be easily integrated into your application, thereby reducing development time and cost.

General description

The CC1101-868MHz RF module is low cost and highly integrated UHF transceiver designed for very low power wireless applications. These certified modules, operating in the license free 433 MHz ISM band, can be easily integrated into your application, thereby reducing development time and cost.


Features:

  • Low power UHF wireless transceivers @868MHz
  • Support FSK, GFSK, ASK/OOK and MSK
  • Configurable data rate 1.2K to 500kps
  • Two 64 bytes FIFO for TX & RX buffer
  • Packet handling including address recognition
  • Support Wake-On-Radio
  • Support Clear Channel Assessment (Listen-before-Talk)
  • RSSI Output & Link Quality Indictor
  • SPI Interface
  • Wide Operating Voltage 1.8~3.6V


Applications

  • AMR – Automatic Meter Reading
  • Two-way RKE – Remote Keyless Entry
  • Low power telemetry
  • Home and building automation
  • Wireless alarm and security systems
  • Industrial monitoring and control
  • Wireless sensor network
Request
Callback
Yes! I am Interested

Finger Print Module GT-511C3

Finger Print Module GT-511C3
  • Finger Print Module GT-511C3
Get Best Quote
Approx. Price: Rs 1,275 / PieceGet Latest Price

Product Details:

Attendance Capacity200 nos.

This device is one chip module with;
- Finger pint algorithm.
- Optical sensor.

The major function are the following:-
- High accuracy and High speed finger print identification technology.
- Ultra-thin optical sensor.
- 1:1 verification, 1:N identification
- Downloading finger print image file from device.
- Reading & writing finger print template(s) from/to the device.
- Simple Uart & USB communication protocol.

Technical specification:-
- CPU:- ARM Cortex M3 core (Holtek HT32F2755)
- Sensor:- Optical sensor
- Image size:- 202x258 pixels
- 200 numbers of maximum finger print
Request
Callback


Additional Information:

  • Minimum Order Quantity: 01 Piece
Yes! I am Interested

Arduino Compatible Voice Recognition Module

Arduino Compatible Voice Recognition Module
  • Arduino Compatible Voice Recognition Module
Get Best Quote
Approx. Price: Rs 1,825 / PieceGet Latest Price
Description:

This Voice Recognition Module is a compact and easy-control speaking recognition board. This product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all. Max 7 voice commands could work at the same time. Any sound could be trained as command. Users need to train the module first before let it recognizing any voice command. This board has 2 controlling ways: Serial Port (full function), General Input Pins (part of function). General Output Pins on the board could generate several kinds of waves while corresponding voice command was recognized.

Parameters

  • Voltage: 4.5-5.5V
  • Current: <40mA
  • Digital Interface: 5V
  • TTL level UART interface
  • Analog Interface: 3.5mm mono-channel microphone connector + microphone pin interface
  • Size: 30mm x 47.5mm
Request
Callback


Additional Information:

  • Minimum Order Quantity: 01 Piece
Yes! I am Interested

4 Wire Resistive Touch Screen Mux

4 Wire Resistive Touch Screen Mux
  • 4 Wire Resistive Touch Screen Mux
Get Best Quote
Approx. Price: Rs 335 / PieceGet Latest Price

Product Details:

BrandGraylogix
ModelResistive Touch Screen
Item Weight100gm
Product Dimensions10.2 x 7.6 x 5.1 cm
Compatible DevicesAurdino, 8051, PIC, AVR, Raspberry PI and all other Microcontrollers.

Product description

About 4 wire resistive touch screen mux break out baord, can be used with any graphical lcd in the back groung, features and usage vcc 5v out put: analog by touching the screen on any given point, you will get analog voltage on the corresponding axis. "x" axis: moving from left to right the voltage remains constant and moving from top to bottom the voltage varies, (select pin should be active heigh). "y" axis: moving from top to bottom the voltage remains constant and moving from left to right the voltage varies, (select pin should be active low). To get the accurate measuring axis of x and y, follow the instructions below: to get "y" axis data output: select pin should be ground to get "x" axis data output: select pin should be tied to vcc toggle select pin to heigh and low pulses to get "x" & "y" axis data correspondingly and get the out put analog volates of the corresponding axis. Inclusions 1 x 4 wire resistive touch screen mux break out board

 

Technical Details
BrandGraylogix
ModelResistive Touch Screen
Item Weight100 g
Product Dimensions10.2 x 7.6 x 5.1 cm
Item model numberResistive Touch Screen
Compatible DevicesAurdino, 8051, PIC, AVR, Raspberry PI and all other Microcontrollers.
Included ComponentsFargo Maestro 20 GSM/GPRS Modem, Power Connector, Serial Cable and Antenna`
Number Of Items1
Request
Callback


Additional Information:

  • Minimum Order Quantity: 01 Piece
Yes! I am Interested

JPEG Color Camera Serial UART Interface Module

JPEG Color Camera Serial UART Interface Module
  • JPEG Color Camera Serial UART Interface Module
Get Best Quote
Approx. Price: Rs 1,600 / PieceGet Latest Price

Description: 

This Serial JPEG Color Camera module is a compact size, low power consumption, and stable operation. 5.0V DC Supply. UART: Up to 115200bps for transferring JPEG images. The camera uses the advanced Omni Vision OV7725 VGA color sensor JPEG CODEC for different resolutions. The camera also features down sampling, clamping and windowing circuits for VGA, QVGA, and no need for external DRAM. The use of the Omni Vision CMOS VGA color sensor makes this a low powered consumption unit.

The interface of this module is using RS232 protocol. If you are planning to use it with MCU UART then add a MAX232 Interface between this camera and your MCU so that conversion can be made between UART level of MCU which usually works at 5V and RS232 level of camera.

Specification:

  • 5V power supply
  • Current consumption: 80-100mA
  • Communication interface/protocol: RS232
  • VGA/QVGA/160x120 resolution
  • Support capture JPEG from serial port
  • Default baud rate of serial port is 115200
  • Size:1.51x1.51x1.26"(38.35x38.35x32mm)
Request
Callback


Additional Information:

  • Minimum Order Quantity: 01 Piece
Yes! I am Interested

Micro Module

Micro Module
  • Micro Module
Get Best Quote
Approx. Price: Rs 6,300 / PieceGet Latest Price
Description:

Designed for OEM integration, Interlink's MicroModule pointing solutions The Micro Module is a finger-actuated "mouse" pointing module that provides complete 360-degree directional control and accurate speed control simultaneously. Users control direction by applying pressure in the direction of the desired movement and adjust the speed by altering the amount of pressure on the device.

Micro Module is ideal for computer cursor control in rugged mobile computers, hardened keyboards, navigation systems, machine control panels, pan and tilt controllers, motion controllers, CNC controllers and medical control equipment. It's a durable, maintenance-free "miniature" solution that works well in tight spaces and is capable of delivering "mouse" lifetimes of more than 3 million actuations. An integrated sealing rib also makes it possible to seal MicroModule into a system during installation.

Directional control is achieved by applying pressure in the direction of desired movement. Speed is controlled by altering the amount of applied pressure. The result is smooth cursor movement in any direction, from a precise crawl to a screen-crossing zip. VersaPoint technology has no moving parts to break or wear out, thus delivering reliable, trouble-free cursor control.

The device is available in both USB or PS/2 versions and three connecting cable options. For prolonged exposure to fuels, oils, solvents and aggressive fluids we offer a robust keypad option.

The most basic FSR consists of two membranes separated by a thin air gap. The air gap is maintained by a spacer around the edges and by the rigidity of the two membranes. One of the membranes has two sets of fingers which are interdigitated and electrically distinct; each set connects to one trace on the tail. The other membrane is coated with FSR ink. When the two layers are pressed together, the FSR ink shorts the two traces together with a resistance that depends on applied force.

Request
Callback


Additional Information:

  • Minimum Order Quantity: 01 Piece
Yes! I am Interested

Finger Print Module GT-521F52

Finger Print Module GT-521F52
  • Finger Print Module GT-521F52
Get Best Quote
Approx. Price: Rs 1,870 / PieceGet Latest Price

Product Details

Attendance Capacity3000 fingerprints
CPUARM Cortex M3 Core
SensorOptical Sensor
Window in mm16.9 x 12.9
Image Size258 x 202 Pixels
Resolution450 dpi
Communication InterfaceUART, default baud rate = 9600bps after power on USB Ver2.0, Full speed
Identification TimeLess than 1.5 sec

Feature

  • Simple UART & USB communication protocol
  • Complies with USB 2.0 full-speed (12Mbps) specification
  • Ultra-thin Optical Sensor
  • Resolution 450 DPI
  • 200/3000 fingerprints storage
  • Wake up on Finger Function
  • Works well with dry, moist or rough fingerprints
  • Anti-Scratch with surface high hardness 5H
  • 11 verification, 1N identification
  • Reading & writing fingerprint template(s) from/to the device
  • High-accuracy and high-speed fingerprint identification technology
  • Downloading fingerprint image from the device
  • Convenient & Safe & Facilitation—Just one touch and easy to enroll
Request
Callback


Additional Information:

  • Minimum Order Quantity: 01 Piece
Yes! I am Interested

2A L298 Motor Driver Board

2A L298 Motor Driver Board
  • 2A L298 Motor Driver Board
Get Best Quote
Approx. Price: Rs 165 / PieceGet Latest Price

Description:

L298 Motor driver based module. Small module which can be used with any circuit very easily. Controls 2 DC motors/ 1 Stepper motor in both direction. PWM/NON PWM control using jumpers. Diodes provided for back EMF protection.

Motor Driver Module Features

  • Driver chip: L298 dual H-bridge driver chip.
  • Operates up to 35V DC
  • Drive part of the peak current Io: 2A / Bridge
  • Logical part of the terminal power supply range Vss :4.5V-5.5V
  • Logical part of the operating current range: 0 ~ 36mA
  • Maximum power consumption: 20W
Request
Callback


Additional Information:

  • Minimum Order Quantity: 01 Piece
Yes! I am Interested

Digital Voltmeter Ammeter DC 0-100V 10A Monitor Panel

Digital Voltmeter Ammeter DC 0-100V 10A Monitor Panel
  • Digital Voltmeter Ammeter DC 0-100V 10A Monitor Panel
Get Best Quote
Approx. Price: Rs 290 / PieceGet Latest Price

Specifications:

  • Supply voltage: 4.5 - 30V (wide range)
  • Voltage measurement range: DC 0-100V
  • Current measurement range: DC 0-10A
  • Display screen: 0.28 inch LED
  • Operating current:<20mA
  • Measuring speed:≥ 500mS/times
  • Accuracy: 1%(± 1 word)
  • Minimum operating voltage: +4.5 V
  • Maximum operating voltage: +30 V
  • Operating Humidity:10???80%
  • Operating temperature: -10???+65
  • Operating pressure: 80 ~ 106kPa
  • 10A inbuilt Shunt

Wiring Diagram:

  • Red line thin: power supply+
  • Black line thin: power supply -
  • Red line (thick): PW+, measuring terminal voltage input positive
  • Yellow line (thick): IN+, current input
  • Black line thick: COM, common measuring
Request
Callback


Additional Information:

  • Minimum Order Quantity: 01 Piece
Yes! I am Interested

L293 Motor Driver Board

L293 Motor Driver Board
  • L293 Motor Driver Board
Get Best Quote
Approx. Price: Rs 115 / PieceGet Latest Price

Product Details:

Supply-Voltage Range4.5 V to 36 V
Drive operating current IO:600 mA for each motor
ControlThe driver can driver two DC motors (Motor A & B) or one stepper motor.
ConnectionsTerminal Blocks for connecting motors & power supply
Peak Output Current2 A Per Channel

This Motor Driver Board is designed to Work with L293D IC. The L293D is a popular motor driver IC designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V. With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller. This can control 2 DC Motors, their direction using control lines and their speed using PWM.

Features

  • Wide Supply-Voltage Range: 4.5 V to 36 V
  • Separate Input-Logic Supply
  • Pin compatible with L293D
  • Internal ESD Protection
  • Thermal Shutdown
  • High-Noise-Immunity Inputs
  • Output Current 0.6 A Per Channel
  • Peak Output Current 2 A Per Channel
  • Output Clamp Diodes for Inductive Transient Suppression
Request
Callback


Additional Information:

  • Minimum Order Quantity: 01 Piece
Yes! I am Interested

TB6600 Stepper Motor Driver 4.5A

TB6600 Stepper Motor Driver 4.5A
  • TB6600 Stepper Motor Driver 4.5A
Get Best Quote
Approx. Price: Rs 675 / PieceGet Latest Price
Approx. Price: Rs 690 / Piece

Product Details:

Rated maximum output reached+/- 4.5A
SubdivisionFull Step, Half Step, 1/4-step, Step 1/8, 1/16-step, Up To 16 Segments.
ApplicationFor 4.2A 42,57,86 within the two-phase / four-phase / four-wire / six-wire stepper motor.

TB6600 stepper motor driver provides maximum 4.5A output current. TB6600 comes with output sort-circuit protection, Low-Pressure shut-off, Overheating parking and over-current protection. Output current is infinitely adjustable to meet various applications. Features:

  • high current, high voltage TB6600HG new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit, short-circuit protection and increased compared to TB6560
  • high-speed optical coupling 6N137, ensure high speed without losing step
  • The output current is infinitely adjustable to meet various application requirements
  • Automatic half current function. And a semi-automatic flow switch, easy to use
  • The use of high-speed optical coupling 6N137 ensure high-speed without losing step
  • Printed on the back panel are subdivided setup instructions
  • Used to increase the heat sink, good heat dissipation
  • Output short-circuit protection
  • Using common anode input mode, there are two input terminals, wiring more convenient
Request
Callback


Additional Information:

  • Minimum Order Quantity: 01 Piece
Yes! I am Interested

BTS7960 43A H-Bridge Stepper Motor Driver Module

BTS7960 43A H-Bridge Stepper Motor Driver Module
  • BTS7960 43A H-Bridge Stepper Motor Driver Module
Get Best Quote
Approx. Price: Rs 620 / PieceGet Latest Price

Product Details:

Input Frequency (Hertz)25kHZ
Input Frequency (Hz)25kHZ
SizeApprox. 4 x 5 x 1.2 cm / 1.57x1.97x0.47inch
Voltage5.5V to 27V

Double BTS7960 43A H-bridge High-Power Stepper Motor Driver Module Arduino for Arduino/Robotics

This driver uses Infineon chips BTS7960 composed of high power drive full H-bridge driver module with thermal over current protection. Double BTS 7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High current 43A.

Features of Double BTS7960 43A H-bridge High-Power Stepper Motor Driver Module:
  • Double BTS7960 large current (43A) H-Bridge motor driver.
  • 5v isolate with MCU, and effectively protect MCU.
  • Can solder heat sink.
  • Supply voltage: 5.5-27 voltage.
  • PWM I/P: 25 KHZ.
Applications of Double BTS7960 43A H-bridge High-Power Stepper Motor Driver Module:
  • DIY projects.
  • Robotics projects.
  • Arduino projects.
  • Raspberry-Pi projects.
  • Electrical/Electronic projects.
Request
Callback


Additional Information:

  • Minimum Order Quantity: 01 Piece
Yes! I am Interested
View PDF

Microstepping Motor Driver DRV8825 With Heatsink

Microstepping Motor Driver DRV8825 With Heatsink
  • Microstepping Motor Driver DRV8825 With Heatsink
Get Best Quote
Approx. Price: Rs 190 / PieceGet Latest Price

Description:

This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). The driver has a pinout and interface that are nearly identical to those of A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.

Specifications:

  • Minimum operating voltage: 8.2V
  • Maximum operating voltage: 45V
  • Continuous current per phase: 1.5 Amp
  • Maximum current per phase: 2.2 Amp
  • Minimum logic voltage: 2.5V
  • Maximum logic voltage: 5.25V
  • Microstep resolutions: Full, 1/2, 1/4, 1/8, 1/16 and 1/32
  • Reverse voltage protection?: No
Request
Callback


Additional Information:

  • Minimum Order Quantity: 01 Piece
Yes! I am Interested
View PDF

Microstepping Motor Driver A4988 With Heatsink

Microstepping Motor Driver A4988 With Heatsink
  • Microstepping Motor Driver A4988 With Heatsink
Get Best Quote
Approx. Price: Rs 140 / PieceGet Latest Price

Product Details:

Motor Voltage8 to 35 V DC
Phasestepper motor
Continuous current per phase1 amp
Maximum current per phase2 Amp
Minimum logic voltage3V
Maximum logic voltage5.5V
Microstep resolutionsFull, 1/2, 1/4, 1/8, and 1/16

Description:

The A4988 stepper motor driver carrier is a breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver. The driver features adjustable current limiting, overcurrent and overtemperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 – 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling).

Specifications:

  • Minimum operating voltage: 8V
  • Maximum operating voltage: 35V
  • Continuous current per phase: 1 Amp
  • Maximum current per phase: 2 Amp
  • Minimum logic voltage: 3V
  • Maximum logic voltage: 5.5V
  • Microstep resolutions: Full, 1/2, 1/4, 1/8, and 1/16
  • Reverse voltage protection?: No
Request
Callback


Additional Information:

  • Minimum Order Quantity: 01 Piece
Yes! I am Interested
View PDF

MPR121 - Capacitive Touch Sensor Breakout

MPR121 - Capacitive Touch Sensor Breakout
  • MPR121 - Capacitive Touch Sensor Breakout
Get Best Quote
Approx. Price: Rs 210 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Communication ProtocolI2C
Operating Voltage2.5 and 3.6V DC
Low supply voltage mode1.71 to 2.75VDC
Size3 x 2cm (approx)

MPR121 Breakout Board

  • Capacitive touch sensor controller
  • Communication Protocol: I2C
  • Gives you 12 capacitive touch inputs and 1 virtual input
  • Features eight LED driving pins (When these pins are not configured as capacitive inputs, they may be used to drive LEDs)
  • Adjustable I2C Address via 4 jumpers on the bottom of the board. All jumpers are set (closed) by default. An address jumper ties the ADD pin to ground, meaning the default I2C address of the chip will be 0x5A. If you need to change the address of the chip (by shorting ADD to a different pin), make sure you open the jumper first. Jumpers also connect SDA, SCL and the interrupt pin to 10k pull-up resistors. If you don't require the pull-up resistors you can open the jumpers by cutting the trace connecting them.
  • Operating Voltage: 2.5 and 3.6V DC
  • Low-supply voltage mode (1.71-2.75VDC) activated by removing the 0.1uf capacitor between VREG and ground.
  • Size: 3 x 2cm (approx)
  • Add up to 12 capacitive touch pads with this easy to use 12-channel capacitive touch sensor breakout board. Turn any item into a touch sensor!
Request
Callback


Additional Information:

  • Minimum Order Quantity: 01 Piece
Yes! I am Interested
X

Explore more products



Reach Us
Nishant Samant (Proprietor)
Street No. 15, 1/2A, House No. 1, Ambedkar Nagar Road Vevoor
Juna Palghar, Palghar- 401404, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS